Introduction to Saving Gas with Physics
It's the season for summer road trips, but high gas prices make it a costly proposition. Most of us are stuck with internal-combustion vehicles, and we have to pay up (in more ways than one, hello climate change). To save some bucks, it's simple: Just slow down. In this guide, we'll explore the physics behind why driving slower uses less gas, and why it's not just about saving time.

Let's start with the basics. If you have to make a 30-mile drive from your home, and the speed limit is 70 mph, how would the travel time change if you went faster or slower? We'll use physics to understand this.
Velocity and Displacement
Velocity is the rate of change of position. In physics terms, it's the change in position (Δx) divided by the change in time (Δt). If you drove 100 miles in 2 hours, your average velocity was 50 mph.
7 minutes
- 75 mph: 30 miles / 75 mph = 0.
So, driving at 75 mph saves 1. 7 minutes compared to 70 mph. Here's a plot of minutes saved as a function of speed from 55 to 85 mph:! Time](https://example. com/speed-time-plot.
The Impact of Speed on Fuel Efficiency
While you might think fuel economy improves with speed, it's not the case. In the city, you're always braking and accelerating, and it takes a lot of energy to get a car moving after a red light. In actuality, if we stick to highway driving, going faster always requires more gas to cover a given distance.
Forces Acting on a Moving Car
There are three horizontal forces acting on a moving car: (1) A static frictional force (Ff) between the back tires and the asphalt, (2) a rolling friction force of the tires on the road (Froll), and (3) an air-resistance force (Fair), also called drag. The latter two push backward, resisting the car's motion.
- Static Friction (Ff): This force is constant and propels the car forward. - Rolling Friction (Froll): This force is also constant and doesn't change with speed. - Air Resistance (Fair): This force is proportional to the square of the velocity (v). So, if you double your speed, the air resistance quadruples.
\[ F_{net} = F_{f} + F_{roll} + F_{air} \]
For a constant speed, the forces are in equilibrium, meaning the forward-pushing force must exactly equal the two backward-pushing forces. This is Newton's second law.
As the velocity (v) increases, the right side of the equation gets (much) larger, which means we need a greater force on the left side to maintain that velocity. And that means the engine must use gas at a faster rate, resulting in lower fuel efficiency.
Conclusion
The advantage of highway driving is that you're traveling at a steady rate. So, if you're in that situation where you've got 20 nervous miles till the next gas station, you want to slow down, even though it takes longer, because you'll use less gas to cover the same distance. The slower you go, the farther you'll go, at least down to about 50 mph, where air drag is no longer a significant factor.

Comments