Introduction
I've always had a complicated relationship with the more premium side of smart lighting, such as Philips Hue. While their hardware and app are polished, the cost and proprietary nature of their ecosystem often make them a poor investment. In this guide, we'll explore how to build a DIY smart LED lighting system that rivals Philips Hue's capabilities while being significantly more cost-effective.
The Problem with Philips Hue
Philips Hue offers a sleek and well-structured ecosystem, but the cost of a single light strip starter kit can easily exceed $80. Additionally, you might need a longer strip and a proprietary hub to integrate it with other devices. This guide will show you how to replace your Philips Hue hub with a more cost-effective solution.
The Solution: WLED and ESP32
WLED is an open-source firmware that can transform any ESP32 into a feature-packed LED controller. It supports a variety of LED strips and offers a polished browser UI. However, it only works with addressable LED strips like the WS2812B. For a non-addressable, 12V LED strip, we'll use an ESP32, MOSFETs, and a power supply to replicate Philips Hue's capabilities.
The Hardware Components
The core of our DIY smart LED lighting system is an ESP32 DevKit V1 board, which is a low-cost microcontroller with built-in Wi-Fi and Bluetooth. We'll also need three IRLZ44N N-channel MOSFETs, one per color channel (red, green, and blue). The power supply will be a 12V 1. 5A supply, which will power the LED strip and the ESP32. The ESP32 will be powered by a USB port or a buck converter to bring the voltage down to 5V.
Wiring the System
To connect the ESP32 to the LED strip, we'll use the IRLZ44N MOSFETs. The drain pins of the MOSFETs will be connected to the LED strip's color channels, the source pins will be connected to a common ground rail (which the ESP32 will also connect to), and the gate pins will be connected to three PWM pins on the ESP32. Gate resistors (100 to 470Ω) will be added between the GPIO pins and the MOSFET gates to ensure proper operation.
Automating the System with Home Assistant
Home Assistant is a self-hosted, open-source smart home platform that allows you to control, automate, and unify all your devices locally without relying on the cloud. By configuring Home Assistant, we can expose hundreds of automation triggers that allow us to control our lights in various ways, such as changing color based on weather, sunlight, presence, and other sensor inputs.
Conclusion
This DIY approach offers more control and customization, making it a valuable alternative for those looking to build their own smart home lighting solutions.

Comments