Introduction

Buying an ESP32 board can seem simple, but there are numerous variants available. The ESP32-S3 has quietly become the default choice for most projects, replacing the original ESP32 as the go-to option. This article explores why the ESP32-S3 is the better choice for a wide range of projects.

The best ESP32 board for any project isn't the original one

The ESP32-S3 and Its Advantages

The ESP32-S3, which launched in 2019, uses a dual-core Xtensa LX7 processor instead of the older LX6 cores found in the original ESP32. This upgrade allows the S3 to handle instructions more efficiently and adds vector extensions that were not present in the original chip. These vector instructions enable the S3 to run lightweight machine learning workloads, such as wake-word detection or basic image classification, directly on the chip using Espressif's ESP-DL and ESP-SR libraries. The original ESP32 does not offer this capability.

The S3 also includes native USB OTG support, allowing it to identify as a USB HID device. This feature opens up a variety of applications, such as using the ESP32-S3 as a hardware security keyboard, mass storage device, or serial port without any additional hardware. It also includes a dedicated camera interface for parallel DVP sensors, more GPIO pins (45 compared to the original ESP32's 34), and Bluetooth 5. 0 over the aging 4.

The ESP32-S3 vs. the Original ESP32

While the ESP32-S3 offers significant improvements over the original ESP32, there are still some areas where the original chip excels. For example, classic Bluetooth support is still available in the original ESP32, which is important for projects that need to pair with older Bluetooth audio gear or use profiles like AVRCP and HFP. Additionally, the original ESP32 is generally more accessible and often cheaper than its S3 variant.

The ESP32-C3 Supermini

For projects that require a smaller form factor, the ESP32-C3 Supermini is a great option. This board uses a single-core RISC-V chip running at up to 160 MHz and is designed to run off a 3. 7-volt lithium battery without additional regulation circuitry. This makes it ideal for wearable devices or projects where board size is a critical factor.

Conclusion

The ESP32-S3 is a versatile and powerful board that offers better performance and features than the original ESP32. Depending on your project's specific requirements, the ESP32-S3, original ESP32, or ESP32-C3 Supermini may be the best choice. Each board has its own strengths and weaknesses, and the best option will depend on your project's needs and constraints.

Comments